"OPA2111KP" Dual Low Noise Precision Difet. Operational Amplifier

Product description
Brand: Burr-Brown [BB.]
Model : OPA2111KP
Package: DIP-8
Type : Precision Dual Difet Op-Amp

FEATURES
- LOW NOISE: 100% Tested, 8nV/√Hz max at 10kHz
- LOW BIAS CURRENT: 4pA max
- LOW OFFSET: 500µV max
- LOW DRIFT: 2.8µV/°C
- HIGH OPEN-LOOP GAIN: 114dB min
- HIGH COMMON-MODE REJECTION: 96dB min

APPLICATIONS
- PRECISION INSTRUMENTATION
- DATA ACQUISITION
- TEST EQUIPMENT
- PROFESSIONAL AUDIO EQUIPMENT
- MEDICAL EQUIPMENT
- DETECTOR ARRAYS

DESCRIPTION : The OPA2111 is a high precision monolithic dielectrically isolated FET (Difet) operational amplifier. Outstanding performance characteristics allow its use in the most critical instrumentation applications. Noise, bias current, voltage offset, drift, open-loop gain, common-mode rejection, and power supply rejection are superior to BIFET® amplifiers. Very low bias current is obtained by dielectric isolation with on-chip guarding. Laser trimming of thin-film resistors gives very low offset and drift. Extremely low noise is achieved with patented circuit design techniques. A cascode design allows high precision input specifications and reduced susceptibility to flicker noise. Standard dual op amp pin configuration allows upgrading of existing designs to higher performance levels.

Datasheet download
    " CLICK HERE"

สถานะสินค้า : มีสินค้าในสต๊อก/8 ตัว *Update 10/05/2560

ราคา : 250.00 บาท/ตัว

"OPA2107AP" Precision Dual Difet. Operational Amplifier

Product description
Brand: Burr-Brown [BB.]
Model : OPA2107AP
Package: DIP-8 
Type : Precision Dual Difet Op-Amp

FEATURES
- Very Low Noise: 8nV/√Hz at 10kHz
- Low VOS: 1mV max
- Low Drift: 10μV/°C max
- Low IB: 10pA max
- Fast Settling Time: 2μs to 0.01%
- Unity-Gain Stable

APPLICATIONS
- Data Acquisition
- DAC Output Amplifiers
- Optoelectronics
- High-Impedance Sensor Amps
- High-Performance Audio Circuitry
- Medical Equipment, CT Scanners

DESCRIPTION : The OPA2107 dual operational amplifier provides precision Difet performance with the cost and space savings of a dual op amp. It is useful in a wide range of precision and low-noise analog circuitry and can be used to upgrade the performance of designs currently using BIFET® type amplifiers. The OPA2107 is fabricated on a proprietary dielectrically isolated (Difet ) process. This holds input bias currents to very low levels without sacrificing other important parameters, such as input offset voltage, drift and noise. Lasertrimmed input circuitry yields excellent dc performance. Superior dynamic performance is achieved, yet quiescent current is held to under 2.5mA per amplifier. The OPA2107 is unity-gain stable. The OPA2107 is available in DIP-8 and SO-8 packages

Datasheet download
     "CLICK HERE"

สถานะสินค้า : มีสินค้าในสต๊อก/26 ตัว *Update 10/05/2560

ราคา : 300.00 บาท/ตัว
พิเศษ 6 ตัว ราคา 1600 บาท